Code CONT-STT-PEXM2SA
$0.00
$73.62
RRP $76.29
Code CONT-STT-PEXM2SA
$0.00
$73.62
Price in shop: $76.29
Save
Earn 0 reward points with this product.
  • Description

    Connector(s)
    1 - Connector Type(s): PCI Express x4
    2 - Internal Ports: M.2 (SATA, B-Key, NGFF)
    1 - Internal Ports: M.2 (PCIe, M-Key, AHCI/NVMe, NGFF)
    2 - Internal Ports: SATA (7 pin, Data)

    Environmental
    Operating Temperature: 5°C to 50°C (41°F to 122°F)
    Storage Temperature: -25°C to 70°C (-13°F to 158°F)
    Humidity: 20%~80% RH (Non-condensing)

    Hardware
    Ports: 3
    Interface: M.2 SATA
    Bus Type: PCI Express
    Card Type: Standard Profile (LP bracket incl.)
    Interface: SATA
    Port Style: Integrated on Card
    Interface: M.2 PCIe
    Industry Standards: Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps), PCI Express 3.0

    Indicators
    3 - LED Indicators: M.2 drive status/activity
    1 - LED Indicators: Power

    Packaging Information
    Package Height: 32 mm [1,3 in]
    Package Length: 13 cm [5,1 in]
    Shipping (Package) Weight: 127 g [4,5 oz]
    Package Width: 16,2 cm [6,4 in]

    Performance
    Type and Rate: SATA III (6 Gbps)
    Port Multiplier: No
    Bootable: Yes
    Hardware Raid Supported: No
    ATAPI Support: Yes
    MTBF: 50,000 Hours

    Physical Characteristics
    Weight of Product: 65 g [2,3 oz]
    Material: Steel
    Product Length: 12 cm [4,7 in]
    Product Width: 20 mm [0,8 in]
    Product Height: 12 cm [4,7 in]

    Software
    OS Compatibility: OS Independent; No additional drivers or software required

    Note: When installed in a compatible operating system, the card is natively supported and doesn’t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express).

    Special Notes / Requirements
    System and Cable Requirements
    A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot
    One or two SATA host ports on the host computer (for example, the SATA controller card, or the motherboard SATA ports inside of your computer)
    Note
    The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
    System and Cable Requirements
    An operating system that natively supports PCIe SSDs (NVMe), such as:
    - Windows® 8 and later
    - Mac OS 10.10.3 and later

  • Reviews (0)

    Be the first to review this product.


    Leave your own review